The P4200D is an advanced 2-channel 1U amplifier for any touring or install applications. Combining high power capabilities with superior sound quality, state-of-the-art DSP and USB control function this amplifier is a truly versatile solution for any venue.

Along with impressive power output of up to 4200W per channel (4 Ohm) this amplifier can offer a comprehensive build-in DSP with all the needed processing on-board as well as a fully-functioning matrix for signal routing.

MATRIX 2 х 2
OUTPUT POWER 2 х 2100 W 8 Ohm
2 х 4200 W 4 Ohm
INPUT Analog
DSP Delay, 7xPEQ, LPF, HPF, 5xPEQ, Limiter, Delay

The P4200D is an advanced 2-channel 1U amplifier for touring and install applications. Combining high power capabilities with superior sound quality, state-of-the-art DSP and USB control function this amplifier is a truly versatile solution for any venue.

This amplifier can deliver up to 4200W (4 Ohm) in both channels simultaneously with no drops in efficiency.

The highly advanced DSP provides a whole variety of features allowing to tune every aspect of each channel processing. Each input channel is equipped with Delay and 7xPEQ functions, while each output channel features LPF, HPF, 5xPEQ, Limiter and Delay. The built-in matrix allows to freely route the signal inside the amplifier.

The front panel offers full control of all the amplifier functions. Also, the DSP is accessible via USB and can be tuned and monitored remotely using MX LAB Amplifier Control software.

Features
Areas of application
  • Touring for small and medium venues
  • Concert halls and theaters
  • Hotels, restaurants and bars
  • Night clubs
  • Conference rooms
  • Stadiums and sports arenas

Power amplifier
TYPE 2-channel class D power amplifier
INPUT CONNECTORS 2 х female XLR
LINK CONNECTORS 2 х male XLR
INPUT IMPEDANCE 20 kOhm
INPUT SENSITIVITY 1,4 V
OUTPUT CONNECTORS 2 х Speakon 2 PIN
DAMPING FACTOR >1000 ref 8 Ohm
SIGNAL/NOISE RATIO >112 dB
TOTAL HARMONIC DISTORTION <0.1% (20 Hz - 20 kHz,1W)
FREQUENCY RESPONSE 20 Hz - 20 kHz (±0.3 dB) @ 1W, 8 Ohm
POWER OUTPUT 2 х 2100 W 8 Ohm, 2 х 4200 W 4 Ohm
CONTROL INTERFACE USB
POWER INPUT AC180V-240V (90V-120V), 50-60Hz
POWER CONSUMPTION 230V: 1395W – 6,1A (1/8 of max. output power, 4 Ohm, pink noise in every channel)
MAINS CONNECTOR PowerCON
Processing
INPUT CHANNEL Delay, 7xPEQ (Bell, Notch, Allpass, VariQ)
OUTPUT CHANNEL Matrix, LPF, HPF, 5xPEQ, Limiter, Delay
Enclosure
ENCLOSURE MATERIAL Metal
DIMENSIONS (W) 483mm x (H) 47mm x (D) 448mm
WEIGHT 12,5Kg

P4200D Datasheet - EN

Available in the series

2-channel class D power amplifier
4-channel class D power amplifier
2-channel class D power amplifier
4-channel class D power amplifier
2-channel class D power amplifier
4-channel class D power amplifier
2-channel class D power amplifier
4-channel class D power amplifier
2-channel class D power amplifier
2-channel class D power amplifier