The P1300D is an advanced 2-channel 1U amplifier for any touring or install applications. Combining high power capabilities with superior sound quality, state-of-the-art DSP and USB control function this amplifier is a truly versatile solution for any venue.
Along with impressive power output of up to 1300W per channel (4 Ohm) this amplifier can offer a comprehensive build-in DSP with all the needed processing on-board as well as a fully-functioning matrix for signal routing.
| MATRIX | 2 х 2 |
| OUTPUT POWER | 2 х 650 W 8 Ohm |
| 2 х 1300 W 4 Ohm | |
| 2 х 1690 W 2 Ohm | |
| INPUT | Analog |
| DSP | Delay, 7xPEQ, LPF, HPF, 5xPEQ, Limiter, Delay |
The P1300D is an advanced 2-channel 1U amplifier for touring and install applications. Combining high power capabilities with superior sound quality, state-of-the-art DSP and USB control function this amplifier is a truly versatile solution for any venue.
The highly advanced DSP provides a whole variety of features allowing to tune every aspect of each channel processing. Each input channel is equipped with Delay and 7xPEQ functions, while each output channel features LPF, HPF, 5xPEQ, Limiter and Delay. The built-in matrix allows to freely route the signal inside the amplifier.
The front panel offers full control of all the amplifier functions. Also, the DSP is accessible via USB and can be tuned and monitored remotely using MX LAB Amplifier Control software.
- 2-channel compact Class D amplifier with DSP
- Pure sound with no distortion
- 1U size
- Up to 2600W output total
- Powerful 24bit / 96kHz DSP on every input/output channel
- Built-in audio matrix for signal routing
- User control interface of the front panel
- Remote monitoring and control with Amplifier Control software for PC via USB
- Built-in presets for MX LAB passive loudspeakers
- Touring for small and medium venues
- Concert halls and theaters
- Hotels, restaurants and bars
- Night clubs
- Conference rooms
- Stadiums and sports arenas
| TYPE | 2-channel class D power amplifier |
| INPUT CONNECTORS | 2 х female XLR |
| LINK CONNECTORS | 2 х male XLR |
| INPUT IMPEDANCE | 20 kOhm |
| INPUT SENSITIVITY | 1,4 V |
| OUTPUT CONNECTORS | 2 х Speakon 2 PIN |
| DAMPING FACTOR | >1000 ref 8 Ohm |
| SIGNAL/NOISE RATIO | >112 dB |
| TOTAL HARMONIC DISTORTION | <0.1% (20 Hz - 20 kHz，1W) |
| FREQUENCY RESPONSE | 20 Hz - 20 kHz (±0.3 dB) @ 1W, 8 Ohm |
| POWER OUTPUT | 2 х 650 W 8 Ohm |
| 2 х 1300 W 4 Ohm | |
| 2 х 1690 W 2 Ohm | |
| CONTROL INTERFACE | USB |
| POWER INPUT | AC180V-240V (90V-120V), 50-60Hz |
| POWER CONSUMPTION | 230V: 432W – 1,9A (1/8 of max. output power, 4 Ohm, pink noise in every channel) |
| MAINS CONNECTOR | PowerCON |
| INPUT CHANNEL | Delay, 7xPEQ (Bell, Notch, Allpass, VariQ) |
| OUTPUT CHANNEL | Matrix, LPF, HPF, 5xPEQ, Limiter, Delay |
| ENCLOSURE MATERIAL | Metal |
| DIMENSIONS | (W) 483mm x (H) 47mm x (D) 448mm |
| WEIGHT | 12,5Kg |
