BLAST 218 is a 2x18 passive subwoofer created to support events where the best sound quality possible is needed. Designed specifically to work in conjunction with MX LAB full-range speakers, BLAST 218 provides astonishing 144dB of sound pressure, evenly covering even the biggest venues. Use the built-in DSP presets in the MX LAB P series amplifiers to achieve the best results possible.
| SPL | 144dB |
| FREQUENCY RESPONSE | 25Hz – 500Hz |
| TRANSDUCERS | 2 x 18” |
| WEIGHT | 90Kg |
| DISPERSION | Omni |
The BLAST 218 is designed to enhance the low-frequency response of any MX LAB full-range system. It consists of two 18" (460mm) long-throw drivers with 4" (100mm) coils with a peak power of 9600W, installed in a bass reflex cabinet.
The subwoofer is capable of delivering high sound pressure with minimal distortion, while four bass reflex ports reduce airborne noise at high output levels.
The BLAST 218 enclosure is made of birch plywood, covered with a durable water-repellent paint, and equipped with a perforated steel grille. For a greater degree of moisture protection, you can use the optional protective cover for the contact group.
- High power subwoofer 2x18
- Presets for MX LAB P series amplifiers
- 2x18" (460mm) long throw woofer with 4" (100mm) coil
- Rated power of 9600W (Peak)
- 144dB SPL
- Side carry handles
- 24 x M10 points
- Touring in small and medium venues
- Fixed installations in concert halls and theaters
- Bars and restaurants
- Night clubs
- Weddings and corporate events
- Conference rooms
- Stadiums and sports arenas
| TYPE | Passive subwoofer |
| FREQUENCY RESPONSE | 30 Hz – 500 Hz ±3dB; 25 Hz (-10dB) |
| TRANSDUCERS | LF: 2 х 18” (460mm) / 4” (100mm) coil. Neodymium |
| SPL | 138dB continuous /144dB peak |
| PASSIVE POWER HANDLING | 2400W (AES) 9600W (Peak) |
| NOMINAL IMPEDANCE | 4Ohm |
| DISPERSION | Omni |
| CONNECTORS | 2 х Speakon 4Pin |
| INPUT CONNECTIONS | 1+/1- |
| LINK CONNECTIONS | 1+/1- to 1+/1- |
| ENCLOSURE MATERIAL | Birch plywood |
| FINISH | Black textured water-repellent paint |
| GRILLE | Perforated metal |
| FITTINGS | 24 х М10, М20 thread for a 35mm pole |
| DIMENSIONS | (W) 1180mm x (H) 563mm x (D) 800mm |
| WEIGHT | 90Kg |
